Insert first.
Place the inflated AyrSupport in your open travel cover. Seat the bottom corners in the base and the top corners fully in the cover.
Choose your nozzle. Hold to unlock. Press to start.
Match the shape: taller cone, smaller opening, snug fit.
Hold the side power button until the light flashes, then release.
The pump starts. Press once again to stop.
With the pump off, hold 3 seconds until the light flashes. This helps prevent accidental starts during travel.
The pump won’t stop automatically. Stop when firm; do not overinflate. Keep the top air inlet clear.
Place the inflated AyrSupport in your open travel cover. Seat the bottom corners in the base and the top corners fully in the cover.
Open AyrSupport fully and lower your golf bag into the center. Make sure your clubs are surrounded.
Fasten AyrSupport’s Velcro closures around your bag, then zip the travel cover closed.
Use the taller cone with the smaller opening, and seat it snugly in both the pump’s side port and the AyrSupport valve.
Charge it using the included USB-C cable and a 5V USB power source. The manual specifies 3 hours before first use. A red low-power light means less than 5% battery remains.
After charging, hold the side power button for 3 seconds until the indicator flashes, release, then press once. The separate button underneath controls the camping light.
Reposition the top and bottom corners. If needed, release a little air, seat everything, and reinflate slightly. Put sharp or loose items inside your golf bag before packing.
Designed for stand, carry, and most hybrid bags. Not designed for cart or tour bags.
Open the valve cap and press the center button inside the valve. Gently press and fold AyrSupport as air exits. Release the button when finished.
To lock the pump for travel, turn it off, then hold its power button for 3 seconds until the indicator flashes.
Limit continuous use to 5 minutes, then let the pump cool for more than 5 minutes before using it again.
